ROSE Bikes Back Roller Urban QL 2.1 Pannier Bag| Bike Bags

The multifunctional ORTLIEB Back Roller Urban Line pannier bag (single bag) is ideal for anyone who needs a spacious, waterproof bag for the way to work, university or school. Suitable for casual or business outfits, the bag is made of a Cordura cotton mix with a textile look. Thanks to the PU coating on the inside, it is still absolutely waterproof. The bag can be fitted to the luggage rack in a quick and uncomplicated way using the practical Quick-Lock2.1 mounting system. A permanently installed inner pocket, consisting of a main compartment and a zipped mesh pocket, ensures a tidy inside of the bag. With the shoulder strap, the BACK-ROLLER URBAN can be carried comfortably as a shoulder bag.

Details:
Single pannier for left or right side mounting
Classic city rear pannier (single bag) with roll-top closure
PU coated, soft touch Cordura-cotton blend
With Quick-Lock2.1 mounting system for racks with a tube diameter of up to 16 mm
Including reducing adapters for tube diameter 8, 10 and 12 mm with anti-scratch function to protect the rear rack

With integrated inside pocket and shoulder strap
Upper QL hook and lower sliding hook can be adjusted without tools
The lower hook rail consists of a two-component plastic “hard-soft” with anti-scratch function to protect the rear rack

Ideal for shopping, sports, picnics etc.
Reflective design elements
Easy to clean inside

Note: Just one pannier included in the scope of delivery.

Technical details:
Dimensions: approx. 42 x 23/32 x 17 cm (H x W x D)
Volume: approx. 20 l
Weight: approx. 840 g

NOTE: In order to reach protection standard IP64 (6=dustproof, 4=resistant to wheel spray coming from all directions) the roll closure must be folded down 3-4 times and fixed at the bottom.

In the box:
1 ORTLIEB Back Roller Urban QL 2.1 bike bag
With carrying strap and reducing adapters in 8, 10 and 12 mm (2 pairs per size)

Highlights & Technologies:

QUICK-LOCK2.1:
The bicycle bag mounting system QL2.1 is based on the proven QL2 system, but has been further upgraded to perfectly fit current pannier rack models.
Comfortable single-handed operation
The 16 mm Quick-Lock hooks come with reducing sleeves with anti-scratch function in 8, 10 and 12 mm. For a more secure connection, the reducing sleeves of the QL2.1 are fitted into the base hook from the sides
For optimal stability the upper hook rail comes in a single-piece design, yet it can be adjusted to fit the either side of the rack on Office-Bag and Downtown models
A special tightening technique allows the use of particularly flat nut washers on the inside. This makes it almost flat and protects the goods being transported
The lower hook rail consists of a two-component plastic with anti-scratch function. The contact surfaces are soft to reduce rubbing against the rack tube. The lower hook rail is rotatable in 15-degree steps and adjustable in height.
All hooks may be adjusted without tools and replaced within seconds
The upper rail is compatible with optional theft protection systems

Note:
The reflective design elements attached as decorative elements do not represent a personal protective equipment as mentioned in EU regulation 2016/425. Thus, they are also not covered by the provisions of the regulation.