ROSE Bikes Clik Valve Conversion Kit DV-PV| Accessories

Schwalbe Click Valves were designed to make tyre inflation child’s play. And with this kit, you can convert your Dunlop valves to the new standard in not time at all. To do this, the existing valve cores are simply replaced with the Clik Valves.

All you have to do before inflating the tyre is attach a Clik Valve pump head to the valve. And that’s it already! You can start inflating the tyre immediately. The air flow is up to 50 per cent higher than with Presta valves. This is ideal for the initial fitting of tubeless tyres. When you are finished, you can simply pull off the pump head again, without the risk of air loss from the tyre or inner tube.

Details:
• Clik Valve conversion kit for Dunlop valves
• Replace existing valve cores
• Simple inflation by attaching a separately available Clik Valve pump head or adapter
• Requires only low operating forces
• No pressure loss when removing the pump head from the valve
• Allow for up to 50 % more air flow
• Also compatible with many pump heads for Presta valves*

Technical details:
• Material: aluminium, plastic
• Weight: approx. 6.5 g (pair with caps)

In the box:
Schwalbe Click Valve conversion kit, consisting of:

• 2 Schwalbe Clik Valves DV-PV
  • 2 valve caps

  Compatible accessories at ROSE:
  • SKS Germany CLIK TEC pump head (prod. code: 2352147)
  • SKS Germany AIR-X-PLORER 10.0 floor pump with CLIK VALVE pump head (prod. code: 2352146)

  *Note
  If you don’t have a pump with a Clik Valve pump head at hand, you can often also use pump heads for Presta valves for the Clik Valve. However, this is not possible in every case.