ROSE Bikes VARIO 26L QL3.1 Backpack Bike Bag| Bike Bags

Versatile, practical and really stylish!
The ORTLIEB VARIO backpack bike bag with 26 litres leaves it up to you to decide whether you want to use it as a backpack or a pannier – or both.

The system: The comfortable back carrying system is located on one side of the bag, while the flat elements of the QUICK-LOCK3.1 rack holder are located on the other. The practical flap can be easily hooked onto the sides of the bag and covers one of the two fronts as required – a clever combination of design and practicality!

Details:
Spacious bike backpack with roll-top closure and QUICK-LOCK mounting system for compatible rear racks
Equipped with QUICK-LOCK 3.1 system
Back of the bag with flat mounting points without interfering hooks
Bike bag and backpack in one
Quick and easy switch between the functions thanks to a reversible front pocket
Waterproof and dustproof in accordance with IP64
Ergonomic shoulder straps
Padded carrying system
Large-volume main compartment with roll-top closure
Outer pocket integrated in cover flap (not waterproof)
Mesh side pocket on the outside
Inner pocket with laptop compartment for notebooks up to approx. 15.6”
Carrying handle and chest strap
Reflective design elements
PVC-free

Technical details:
Dimensions: approx. 47 x 31 x 22 cm (H x W x D)
Dimensions laptop sleeve: approx. 36 x 24.5 x 2.5 cm (H x W x D) ‒ for a notebook with a 15.6 inch display
Volume: approx. 26 l
Protection category: IP64
Load: up to approx. 9 kg
Weight: approx. 1480 g

Note:
In order to reach protection standard IP64 (6=dustproof, 4=resistant to wheel spray coming from all directions) the roll-top closure must be folded down 3-4 times and fixed at the bottom.
This bag is supplied without the QL3.1 mounting set, instead QL3.1 locking buttons are included. If your luggage rack is not equipped for QL3.1, you can order the mounting set under prod. code: 2256975 as an option.

In the box:
1 ORTLIEB VARIO 26 L QL3.1 bike backpack
1 ORTLIEB QL3.1 locking buttons set

Optional accessories (subject to availability):
ORTLIEB QL3.1 mounting kit for panniers (prod. code: 2256975)

Highlights & Technologies:

QUICK-LOCK3.1:
With this mounting system, the main supporting elements are fixed to the luggage rack. Thus, there are no large, protruding hooks on the back of the bag, which improves comfort.
The QL3.1 mounting system allows for quick and easy attachment of the pannier. Simply position the bag on the lower mounting point, move it towards the rack, swivel it in from the left or right and securely attach it to both mounts on top. Removing the bag is just as quick and easy: Simply lift the bag by the handle and simultaneously swing it either to the left or to the right, done!
Comfortable single-handed operation
Automatic locking and release of the hooks when lifting the bag by the carrying handle
Direct mounting possible on luggage racks with integrated QL3/QL3.1 attachment
Lower hook can be rotated 360 degrees (in 24 steps of 15 degrees each) for individual adaptation to a wide variety of luggage racks with tube diameters of up to 14 mm
Horizontal rack top remains free for baskets, trunk bags etc.
A separate mounting rail is required for luggage racks without an integrated QL3.1 device (optionally available under prod. code: 2256975 (subject to availability).

Note:
The reflective design elements attached as decorative elements do not represent a personal protective equipment as mentioned in EU regulation 2016/425. Thus, they are also not covered by the provisions of the regulation.